This type of fire resistant and flame retardant cable is suitable for power distribution lines with requirements of flame-retardant or fire-resistant fixed installations.

Reference Standards:	IEC502-1983, IEC331-1970, etc.
Rated Voltage:	600/1000V (0.6/1kV)
Core Number:	Single Core, Two Core, Three Core, Four Core, Five Core (1C, 2C, 3C, 4C, 5C)
Available Dimensions:	1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2.
Codes Available:	NH-VV, NH-YJV, NH-VV22, NH-YJV22, NH-VV32, NH-YJV32
Application:	Mica Fire Resistant Cable is used in the environment with high demand on fire-resisting performance such as high-rises building, power station, power plant, mine, chemical industry, subway, and so on. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected during installation.
Construction:	Mica Fire Resistant Cable
Conductor:	Stranded round copper conductor (Cu), copper wire annealed.
Insulation:	XLPE (Cross-Linked Polyethylene) or PVC (Polyvinyl Chloride)
Core Identification:	1 Core: Brown 2 Cores: Brown, Blue 3 Cores: Brown, Black, Grey 4 Cores: Blue, Brown, Black, Grey 5 Cores: Green/Yellow, Blue, Brown, Black, Grey Alternative core identification: White Cores with Black numbers
Filler:	Polypropylene filament with lapped binding tape
Separator:	Binding tape
Bedding:	PVC (Polyvinyl Chloride) or LSZH.
Armouring:	Single Core: Aluminium Wire Armoured (AWA) Multi-core: Steel Wire Armoured (SWA) or Steel Tape Armoured (STA)
Sheath:	PVC (Polyvinyl Chloride), flame retardant PVC, PE, LSOH, HFFR
Colour:	Black, Gray
Temperature Rating:	0℃ to 90℃ (XLPE), 0℃ to 70℃ (PVC) During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 250℃ (160℃ for PVC) Environment temperature should be no lower than 0℃ for laying the cable.
Minimum Bending Radius:	Single Core Cable: Non Armored Cable 20D, Armored Cable 15D Cores Cable: Non Armored Cable 15D, Armored Cable 12D. Remarks: D means practical external diameter of the cable

Application conditions

1. The long-time permissible operation temperature of conductor shall not be higher than 70^oC.

2. Conductor maximum short circuit (not more than 5 seconds) temperature shall not be higher than 160°C.

3. The power cable is not limited by drop in level when being laid, and the ambient temperature shall not be lower than 0°C.

If so, the cable should be preheated.

4. Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents, and flame.

5. Light weight, perfect bending properties, installed and maintained easily and conveniently.

PO / FR-PVC Jacket FRLS Fire Resistant Cable 0.6KV 1KV For Power Distribution Lines 0

Tags:

Mit Isolationserhalt im Brandfall Draht,

Feuer mit Kabel bewertet,

elektrisches Kabel des Feuerbeweises

Empfohlene Produkte

PVCpet Isolierfeuer-bewertetes Kabel, Feuer-Beweis-elektrisches Kabel einkerniges IEC60332

Kontaktieren Sie uns jetzt

Entkernt Franc feuerbeständiges Kabel 4 kupfernen Leiter XLPE Isolier-0.6/1kV

Kontaktieren Sie uns jetzt

Drei Kern-450V/750V feuerbeständiger Draht, flammhemmende Kabel PET Isolierung

Kontaktieren Sie uns jetzt

Niederspannungs-feuerbeständiges Kabel-einkernige PVC-Hülle Xlpe-Isolierung

Kontaktieren Sie uns jetzt

FRC-Feuer-sicheres Kabel, feuern bewerteten elektrischen Kabel XLPE Isolier-CU Leiter ab

Kontaktieren Sie uns jetzt

CU/GLIMMER/XLPE/PVCs feuerbeständiges Kabel 0.6/1kV 4x240mm2 für Strom-Energie

Kontaktieren Sie uns jetzt

Halogen-freies feuerverzögerndes niedriges Rauch-Kabel, feuerbeständiger Draht LSZH

Kontaktieren Sie uns jetzt

feuerbeständige Größe 1.5sqmm | Kern 800sqmm vier Iec 60331 des Kabel-0.6/1kV

Kontaktieren Sie uns jetzt

4 Kerne FRC-Feuer veranschlagte gepanzerten Leiter des Kabel-LSZH umhüllten Kupfer-0.6/1kV

Kontaktieren Sie uns jetzt

600/1000V feuerbeständige Isolierungs-flammhemmende Hülle des Kabel-XLPE

Kontaktieren Sie uns jetzt

Umhülltes Innenim Freien des Feuer-Nennleistungs-Kabel-Glimmer-0,6/1kV des Band-600/1000V

Kontaktieren Sie uns jetzt

EINZELHEITEN ZU DEN PRODUKTEN

Produits

XLPE-isolierte Kabel

PVC-Kabel

Mineralisolierte Kabel

gepanzertes elektrisches Kabel

Mehradriger Seilzug

einkerniger Draht

Abgeschirmtes Instrument-Kabel

niedriger Rauch null Halogenkabel

Feuerbeständige Kabel

Flammhemmendes Kabel

Gummiflachkabel

Antenne zusammengerolltes Kabel

Bloßer Leiter

flexibles elektrisches Kabel

Solarpv-Kabel

Vorfabriziertes Niederlassungs-Kabel

Hohe Temperatur-Kabel

Kupfer verkleidet Aluminium Draht

Flexibles Schweißkabel

Brennschneiderkabel

PO / FR-PVC Jacket FRLS Fire Resistant Cable 0.6KV 1KV For Power Distribution Lines

MOQ:	200m
Preis:	USD0.03-50
Standardverpackung:	100m/roll oder besonders angefertigt
Lieferfrist:	gemäß der Anforderung
Lieferkapazität:	10km pro Woche

Einzelheiten

Produktbeschreibung

Einzelheiten

Herkunftsort

China

Markenname

QINGDAO YICABLE CABLE

Zertifizierung

CE/KEMA/ISO/PCCC

Nennspannung:

0.6/1kV

Zahl von Kernen:

1,2,3,4,5

Jacken-Farbe:

Jede Farbe

Jacken-Material:

PO oder FR-PVC

Hörbeispiel:

Verfügbar

Arbeiten an:

90℃

Funktion:

Feuerbeständig

Min Bestellmenge:

200m

Preis:

USD0.03-50

Verpackung Informationen:

100m/roll oder besonders angefertigt

Lieferzeit:

gemäß der Anforderung

Versorgungsmaterial-Fähigkeit:

10km pro Woche

Hervorheben

fire rated cable

fire resistant wire

Produktbeschreibung

PO / FR-PVC Jacket FRLS Fire Resistant Cable 0.6KV 1KV For Power Distribution Lines

Application

This type of fire resistant and flame retardant cable is suitable for power distribution lines with requirements of flame-retardant or fire-resistant fixed installations.

Reference Standards:	IEC502-1983, IEC331-1970, etc.
Rated Voltage:	600/1000V (0.6/1kV)
Core Number:	Single Core, Two Core, Three Core, Four Core, Five Core (1C, 2C, 3C, 4C, 5C)
Available Dimensions:	1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2.
Codes Available:	NH-VV, NH-YJV, NH-VV22, NH-YJV22, NH-VV32, NH-YJV32
Application:	Mica Fire Resistant Cable is used in the environment with high demand on fire-resisting performance such as high-rises building, power station, power plant, mine, chemical industry, subway, and so on. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected during installation.
Construction:	Mica Fire Resistant Cable
Conductor:	Stranded round copper conductor (Cu), copper wire annealed.
Insulation:	XLPE (Cross-Linked Polyethylene) or PVC (Polyvinyl Chloride)
Core Identification:	1 Core: Brown 2 Cores: Brown, Blue 3 Cores: Brown, Black, Grey 4 Cores: Blue, Brown, Black, Grey 5 Cores: Green/Yellow, Blue, Brown, Black, Grey Alternative core identification: White Cores with Black numbers
Filler:	Polypropylene filament with lapped binding tape
Separator:	Binding tape
Bedding:	PVC (Polyvinyl Chloride) or LSZH.
Armouring:	Single Core: Aluminium Wire Armoured (AWA) Multi-core: Steel Wire Armoured (SWA) or Steel Tape Armoured (STA)
Sheath:	PVC (Polyvinyl Chloride), flame retardant PVC, PE, LSOH, HFFR
Colour:	Black, Gray
Temperature Rating:	0℃ to 90℃ (XLPE), 0℃ to 70℃ (PVC) During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 250℃ (160℃ for PVC) Environment temperature should be no lower than 0℃ for laying the cable.
Minimum Bending Radius:	Single Core Cable: Non Armored Cable 20D, Armored Cable 15D Cores Cable: Non Armored Cable 15D, Armored Cable 12D. Remarks: D means practical external diameter of the cable

Application conditions

1. The long-time permissible operation temperature of conductor shall not be higher than 70^oC.

2. Conductor maximum short circuit (not more than 5 seconds) temperature shall not be higher than 160°C.

3. The power cable is not limited by drop in level when being laid, and the ambient temperature shall not be lower than 0°C.

If so, the cable should be preheated.

4. Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents, and flame.

5. Light weight, perfect bending properties, installed and maintained easily and conveniently.

PO / FR-PVC Jacket FRLS Fire Resistant Cable 0.6KV 1KV For Power Distribution Lines 0

Tags: